Christie Post Driver CHPD-52








Christie Post Driver - This post driver has been developed by Christie Engineering for the harsh Australian environment. It is extremely lightweight and portable while being powerful enough to drive a star or Y steel picket post into the hardest ground in a matter of seconds. The design enables the operator to move along a fence line with ease much faster than traditional air and hydraulic driven units. All internal components are manufactured from the highest quality precision machined materials to give the longest tool life possible. The harsh hammering action is isolated from the operator via spring cushioned handles allowing many hours of fatigue free operation even by commercial operators. The power plant is the ultra-reliable Honda GX35 1.0kW motor boasting 3 year Australia wide warranty. The post driver now also carries a 3 year major parts failure warranty from Christie Engineering (Excludes normal wear). 



There are two versions of this machine, standard CHPD52 and Maxi CHPD78. The maxi will take up to 76mm posts, an adaptor can be inserted to reduce internal diameter to standard size. See brochure for details.

Potential buyers be aware that there are other cheaper versions on the market that look very similar to our unit. Christie Engineering post drivers are in no way affiliated with Rhino in the USA, or Horsley Wholesale in Australia. If it's not stamped "Christie", it's not a Christie unit.



Features-Lightweight design, powerful hammer action with ergonomic design and isolated handles. CNC machined body from Cast high strength heat treated aluminium for a long service life with stainless steel screws that will never rust. High quality sealed bearings are used in all internal rotating components. Genuine Honda GX35 4-stroke Motor with 3 years warranty, precision tool to revolutionise fencing. Australian made by Christie Engineering Pty. Ltd. Registered design: 201111227



$1,760.00RRP $1,760.00
Out of Stock
Specifications
Blows per minute
1720
kW
1.0 (1.3HP) at 7,000 rpm
4-stroke, overhead cam
Trigger throttle with integrated stop button
Spring isolated hand grips
Fuel consumption
0.71 L/h at 7,000 rpm
Meets strictest worldwide emission and noise req.
Starting system
recoil (pull start)
Rating
Continuous use on standard posts
Weight
13.5kg
Engine warranty
3 Year genuine honda warranty
Post driver warranty
12 months parts failure
Noise Level
>100dB Hearing protection required
Join our Mailing List Go
Sitemap | 2015 - 2024 © Judds Engineering Pty Ltd | www.juddsengineering.com.au - All Rights Reserved | Design by UBC Web DesignUBC Web Design logo